Code of Practice 14

Hoses for the Transfer of LPG in Bulk, Installation, Inspection, Testing and Maintenance (September 2002) (OBSOLECENT)

Including August 2006 Amendment

£50.00

This Code sets out the details of such work and includes recommendations on hose repairs and end fitting assemblies.

LPG bulk transfer hoses need care during transit and storage and, in addition, should be subject to a scheme of periodic inspection and examination. This Code sets out the details of such work and includes recommendations on hose repairs and end fitting assemblies. The 2002 edition has been updated in line with the publication of BSEN 1762 and current practice. Includes amendment 1 August 2006

This Code has been declared Obsolescent as its content, as regards hoses to BSEN 1762 has been incorporated in that standard as supplemented by User Information Sheet 24 Preparation, installation, inspection, testing and maintenance of rubber hoses, up to and including 76 mm Internal diameter in accordance with BSEN 1762 (BSEN 1762 is available at the BSi website - click here.)

It remains available for purchase as it is understood that some hoses to BS may remain in service.

Comprises of 9 sections:

SECTION 1: INTRODUCTION, SCOPE, DEFINITIONS, REFERENCES ANDLEGAL REQUIREMENTS

SECTION 2: CARE OF HOSE ASSEMBLIES IN TRANSPORT ANDSTORAGE

SECTION 3: INSTALLATION

SECTION 4: GENERAL CARE

SECTION 5: ROUTINE IN-SERVICE INSPECTION OF HOSES

SECTION 6: PERIODIC EXAMINATION AND TESTING

SECTION 7: RESULTS OF EXAMINATION AND TESTS

SECTION 8: HOSE REPAIR AND ASSEMBLY

SECTION 9: RECORDS

 

Amendments

There are currently no amendments available for this item.

The trade association for the LPG industry in the UK